fontforge - en to unknown language translation catalogue (348 entries)

en:   A linear gradient is represented by a line drawn
    from its start point to its end point.
      A radial gradient is represented by a line drawn
    from its center whose length is the ultimate radius.
    If there is a single additional point, that point
    represents the gradient's focus, if omitted the focus
    is the same as the radius.
target:   A linear gradient is represented by a line drawn
    from its start point to its end point.
      A radial gradient is represented by a line drawn
    from its centre whose length is the ultimate radius.
    If there is a single additional point, that point
    represents the gradient's focus, if omitted the focus
    is the same as the radius.

en: A separator line drawn across a dialog or in a menu
target: A separator line drawn across a dialogue or in a menu

en: Active Color
target: Active Colour

en: Active Layer Color
target: Active Layer Colour

en: Allow editing of multiple colors and shades, fills and strokes.
    Multi layered fonts can only be output as type3 or svg fonts.
target: Allow editing of multiple colours and shades, fills and strokes.
    Multi layered fonts can only be output as type3 or svg fonts.

en: Allow the full unicode character set in glyph names.
    This does not conform to adobe's glyph name standard.
    Such names should be for internal use only and
    should NOT end up in production fonts.
target: Allow the full unicode character set in glyph names.
    This does not conform to Adobe's glyph name standard.
    Such names should be for internal use only and
    should NOT end up in production fonts.

en: Allows you to select optional behavior when generating the font
target: Allows you to select optional behaviour when generating the font

en: Almost H/V Color
target: Almost H/V Colour

en: Anchor Color
target: Anchor Colour

en: Anchored Line Color
target: Anchored Line Colour

en: Apple and MS/Adobe differ about the format of truetype and opentype files.
    This controls the default setting of the Apple checkbox in the
    File->Generate Font dialog.
    The main differences are:
     Bitmap data are stored in different tables
     Scaled composite glyphs are treated differently
     Use of GSUB rather than morx(t)/feat
     Use of GPOS rather than kern/opbd
     Use of GDEF rather than lcar/prop
    If both this and OpenType are set, both formats are generated
target: Apple and MS/Adobe differ about the format of truetype and opentype files.
    This controls the default setting of the Apple tickbox in the
    File->Generate Font dialogue.
    The main differences are:
     Bitmap data are stored in different tables
     Scaled composite glyphs are treated differently
     Use of GSUB rather than morx(t)/feat
     Use of GPOS rather than kern/opbd
     Use of GDEF rather than lcar/prop
    If both this and OpenType are set, both formats are generated

en: Apple and MS/Adobe differ about the format of truetype and opentype files.
    This controls the default setting of the OpenType checkbox in the
    File->Generate Font dialog.
    The main differences are:
     Bitmap data are stored in different tables
     Scaled composite glyphs are treated differently
     Use of GSUB rather than morx(t)/feat
     Use of GPOS rather than kern/opbd
     Use of GDEF rather than lcar/prop
    If both this and Apple are set, both formats are generated
target: Apple and MS/Adobe differ about the format of truetype and opentype files.
    This controls the default setting of the OpenType tickbox in the
    File->Generate Font dialogue.
    The main differences are:
     Bitmap data are stored in different tables
     Scaled composite glyphs are treated differently
     Use of GSUB rather than morx(t)/feat
     Use of GPOS rather than kern/opbd
     Use of GDEF rather than lcar/prop
    If both this and Apple are set, both formats are generated

en: As FontForge creates windows, it loads images for its menus
    from files in a standard directory. You may change this to
    point to a different directory to load a different icon set.
    (If you want no icons at all, change to an empty directory).
    This may not effect windows of a type that is already initialized,
    restarting FontForge will fix that.
target: As FontForge creates windows, it loads images for its menus
    from files in a standard directory. You may change this to
    point to a different directory to load a different icon set.
    (If you want no icons at all, change to an empty directory).
    This may not effect windows of a type that is already initialised,
    restarting FontForge will fix that.

en: AutoKernDialog
target: AutoKernDialogue

en: Background Image Color
target: Background Image Colour

en: Background color for popup windows
target: Background colour for popup windows

en: Background color for progress windows
target: Background colour for progress windows

en: Background color for the drawing area of all views
target: Background colour for the drawing area of all views

en: Background color of column headers at the top of a matrix edit
target: Background colour of column headers at the top of a matrix edit

en: Background color of the active entry in the main section of a matrix edit
target: Background colour of the active entry in the main section of a matrix edit

en: Bad Color
target: Bad Colour

en: Bad RGB color spec: %s
target: Bad RGB colour spec: %s

en: Bad color on line %d, must be between 000000 and ffffff.
target: Bad colour on line %d, must be between 000000 and ffffff.

en: Bad glyph range specified in color subtable of PfEd table
target: Bad glyph range specified in colour subtable of PfEd table

en: Bad hex color spec: %s
target: Bad hex colour spec: %s

en: Bad template, unrecognized format
target: Bad template, unrecognised format

en: Beyond the endpoints, the gradient takes on the color at the end-points
    This does not work for PostScript linear gradients
target: Beyond the endpoints, the gradient takes on the colour at the end-points
    This does not work for PostScript linear gradients

en: Blue Values Color
target: Blue Values Colour

en: Brings up a dialog which gives fine control over
    horizontal positioning of subscripts and superscripts
    depending on their vertical positioning.
target: Brings up a dialogue which gives fine control over
    horizontal positioning of subscripts and superscripts
    depending on their vertical positioning.

en: C_enter
target: C_entre

en: Can this font be embedded in a downloadable (pdf)
    document, and if so, what behaviors are permitted on
    both the document and the font.
target: Can this font be embedded in a downloadable (pdf)
    document, and if so, what behaviours are permitted on
    both the document and the font.

en: Center Bet_ween Control Points
target: Centre Bet_ween Control Points

en: Center Out
target: Centre Out

en: Center of Selection
target: Centre of Selection

en: Centered
target: Centred

en: Centered CJK Punctuation
target: Centred CJK Punctuation

en: Certain programs use pens with white ink as erasers
    If you select (blacken) this checkbox, FontForge will
    attempt to simulate that.
target: Certain programs use pens with white ink as erasers
    If you select (blacken) this tickbox, FontForge will
    attempt to simulate that.

en: Changed Color
target: Changed Colour

en: Check Box
target: Tick Box

en: Check Box Off Mark
target: Tick Box Off Mark

en: Check Box On Mark
target: Tick Box On Mark

en: Clip Path Color
target: Clip Path Colour

en: Color
target: Colour

en: Color Button
target: Colour Button

en: Color of column dividers in the main section of a matrix edit
target: Colour of column dividers in the main section of a matrix edit

en: Color of column dividers in the title section of a matrix edit
target: Colour of column dividers in the title section of a matrix edit

en: Color of frozen (unchangeable) entries in the main section of a matrix edit
target: Colour of frozen (unchangeable) entries in the main section of a matrix edit

en: Color of the active entry in the main section of a matrix edit
target: Colour of the active entry in the main section of a matrix edit

en: Color used to draw the advance width line of a glyph
target: Colour used to draw the advance width line of a glyph

en: Color used to draw the background of selected glyphs
target: Colour used to draw the background of selected glyphs

en: Color used to draw the foreground of selected glyphs
target: Colour used to draw the foreground of selected glyphs

en: Color used to draw the italic advance width line of a glyph
target: Colour used to draw the italic advance width line of a glyph

en: Color used to draw the kerning line
target: Colour used to draw the kerning line

en: Color used to draw the left side bearing
target: Colour used to draw the left side bearing

en: Color used to draw the progress bar
target: Colour used to draw the progress bar

en: Color used to mark a changed glyph
target: Colour used to mark a changed glyph

en: Color used to mark the selected glyph
target: Colour used to mark the selected glyph

en: Color:
target: Colour:

en: Color|Background
target: Colour|Background

en: Color|Choose...
target: Colour|Choose...

en: Color|Default
target: Colour|Default

en: Color|FillColor
target: Colour|FillColour

en: Color|Foreground
target: Colour|Foreground

en: Conflict Hint Color
target: Conflict Hint Colour

en: Coordinate Line Color
target: Coordinate Line Colour

en: Coordinate along which to space
target: Co-ordinate along which to space

en: Cou_nter Clockwise
target: A_nti Clockwise

en: Create Rasterized Strikes (Not empty ones)
target: Create Rasterised Strikes (Not empty ones)

en: Default background color for windows
target: Default background colour for windows

en: Default foreground color for windows
target: Default foreground colour for windows

en: Delta Grid Color
target: Delta Grid Colour

en: Diagonal Hint Color
target: Diagonal Hint Colour

en: Dialog Type:
target: Dialogue Type:

en: Disabled Text Color:
target: Disabled Text Colour:

en: Do you want to round coordinates to integers (this saves space)?
target: Do you want to round co-ordinates to integers (this saves space)?

en: Doesn't look like a valid pdf file, couldn't find xref section
target: Doesn't look like a valid PDF file, couldn't find xref section

en: Don't display columns of 0s.
    The OpenType lookup allows for up to 8 kinds
    of data, but almost all kerning lookups will use just one.
    Omitting the others makes the behavior clearer.
target: Don't display columns of 0s.
    The OpenType lookup allows for up to 8 kinds
    of data, but almost all kerning lookups will use just one.
    Omitting the others makes the behaviour clearer.

en: Don't display columns of 0s.
    The OpenType lookup allows for up to 8 kinds
    of data, but almost all lookups will use just one or two.
    Omitting the others makes the behavior clearer.
target: Don't display columns of 0s.
    The OpenType lookup allows for up to 8 kinds
    of data, but almost all lookups will use just one or two.
    Omitting the others makes the behaviour clearer.

en: Either:
    The amount of extra space to be added after a sentence
    Or the space to be used within math formulae
target: Either:
    The amount of extra space to be added after a sentence
    Or the space to be used within maths formulae

en: Extra white space resevered below the underbar.
target: Extra white space reserved below the underbar.

en: Extrema Point Color
target: Extrema Point Colour

en: Failed to parse color %s
target: Failed to parse colour %s

en: Family Blue Color
target: Family Blue Colour

en: Fill Color
target: Fill Colour

en: First Point Color
target: First Point Colour

en: Freetype rasterization failed.
target: Freetype rasterisation failed.

en: Frozen Color
target: Frozen Colour

en: GGadget|ButtonSize|55
target: 55

en: GGadget|ScaleFactor|100
target: 100

en: Glyph names are limitted to 31 characters
target: Glyph names are limited to 31 characters

en: Grid Fit Color
target: Grid Fit Colour

en: Grid Fit Width Color
target: Grid Fit Width Colour

en: Guide Layer Color
target: Guide Layer Colour

en: HFlex Hint Color
target: HFlex Hint Colour

en: HHint Active Color
target: HHint Active Colour

en: Hint Label Color
target: Hint Label Colour

en: Histogram Dialog
target: Histogram Dialogue

en: Horiz. Hint Color
target: Horiz. Hint Colour

en: Horizontal distance between the top
    and bottom elemnts of a skewed fraction.
target: Horizontal distance between the top
    and bottom elements of a skewed fraction.

en: If specified this should be a space separated list of integers each
    less than 16777216 which uniquely identify your organization
    FontForge will generate a random number for the final component.
target: If specified this should be a space separated list of integers each
    less than 16777216 which uniquely identify your organisation
    FontForge will generate a random number for the final component.

en: Image used instead of the Check Box Off Mark
target: Image used instead of the Tick Box Off Mark

en: Image used instead of the Check Box Off Mark (when the radio is disabled)
target: Image used instead of the Tick Box Off Mark (when the radio is disabled)

en: In this format you define a series of glyph classes and
    specify a matix showing how each class interacts with all
    the others.
target: In this format you define a series of glyph classes and
    specify a matrix showing how each class interacts with all
    the others.

en: Inactive Layer Color
target: Inactive Layer Colour

en: Instructions in a TrueType font refer to
    points by number, so if you edit a glyph
    in such a way that some points have different
    numbers (add points, remove them, etc.) then
    the instructions will be applied to the wrong
    points with disasterous results.
      Normally FontForge will remove the instructions
    if it detects that the points have been renumbered
    in order to avoid the above problem. You may turn
    this behavior off -- but be careful!
target: Instructions in a TrueType font refer to
    points by number, so if you edit a glyph
    in such a way that some points have different
    numbers (add points, remove them, etc.) then
    the instructions will be applied to the wrong
    points with disasterous results.
      Normally FontForge will remove the instructions
    if it detects that the points have been renumbered
    in order to avoid the above problem. You may turn
    this behaviour off -- but be careful!

en: Interpretation|None
target: None

en: Italic Coord. Color
target: Italic Coord. Colour

en: Kern Line Color
target: Kern Line Colour

en: Kerning may be specified either by classes of glyphs
    or by pairwise combinatins of individual glyphs.
    Which do you want for this subtable?
target: Kerning may be specified either by classes of glyphs
    or by pairwise combinations of individual glyphs.
    Which do you want for this subtable?

en: Lang|Amharic
target: Amharic

en: Lang|Arabic
target: Arabic

en: Lang|Armenian
target: Armenian

en: Lang|Avar
target: Avar

en: Lang|Bengali
target: Bengali

en: Lang|Berber
target: Berber

en: Lang|Cherokee
target: Cherokee

en: Lang|Coptic
target: Coptic

en: Lang|Farsi
target: Farsi

en: Lang|Farsi/Persian
target: Farsi/Persian

en: Lang|Ge'ez
target: Ge'ez

en: Lang|Georgian
target: Georgian

en: Lang|Greek
target: Greek

en: Lang|Gujarati
target: Gujarati

en: Lang|Hebrew
target: Hebrew

en: Lang|Javanese
target: Javanese

en: Lang|Kannada
target: Kannada

en: Lang|Khmer
target: Khmer

en: Lang|Lao
target: Lao

en: Lang|Latin
target: Latin

en: Lang|Limbu
target: Limbu

en: Lang|Malayalam
target: Malayalam

en: Lang|Manchu
target: Manchu

en: Lang|Mongolian
target: Mongolian

en: Lang|Oriya
target: Oriya

en: Lang|Sinhalese
target: Sinhalese

en: Lang|Syriac
target: Syriac

en: Lang|Tagalog
target: Tagalog

en: Lang|Tamil
target: Tamil

en: Lang|Telugu
target: Telugu

en: Lang|Thai
target: Thai

en: Lang|Tibetan
target: Tibetan

en: Lang|Uighur
target: Uighur

en: Lang|Yi
target: Yi

en: License
target: Licence

en: License URL
target: Licence URL

en: Ligature Caret Color
target: Ligature Caret Colour

en: Localized Forms
target: Localised Forms

en: Math Sp:
target: Maths Sp:

en: Mathematical centerline
target: Mathematical centreline

en: Maximum allowed drop of the baseline of
    subscripts realtive to the bottom of the base.
    Used for bases that are treated as a box
    or extended shape. Positive for subscript
    baseline dropped below base bottom.
target: Maximum allowed drop of the baseline of
    subscripts relative to the bottom of the base.
    Used for bases that are treated as a box
    or extended shape. Positive for subscript
    baseline dropped below base bottom.

en: Maximum allowed drop of the baseline of
    superscripts realtive to the top of the base.
    Used for bases that are treated as a box
    or extended shape. Positive for superscript
    baseline below base top.
target: Maximum allowed drop of the baseline of
    superscripts relative to the top of the base.
    Used for bases that are treated as a box
    or extended shape. Positive for superscript
    baseline below base top.

en: Measure Pixels Per EM
    Pushs the pixels per em (for current rasterization)
target: Measure Pixels Per EM
    Pushes the pixels per em (for current rasterisation)

en: Metrics Label Color
target: Metrics Label Colour

en: Minimum allowed hieght of the bottom
    of superscripts that does not require moving
    them further up.
target: Minimum allowed height of the bottom
    of superscripts that does not require moving
    them further up.

en: Minimum gap between the supersecript and subscript ink.
target: Minimum gap between the superscript and subscript ink.

en: Missing left parenthesis in command to get a cvt index
target: Missing left bracket in command to get a cvt index

en: Missing right paren in command to get a cvt index
target: Missing right bracket in command to get a cvt index

en: Next CP Color
target: Next CP Colour

en: No (useable) bitmap strikes in this TTF font: %s
target: No (usable) bitmap strikes in this TTF font: %s

en: No paths with within a glyph should intersect
target: No paths within a glyph should intersect

en: Normal Text Color:
target: Normal Text Colour:

en: Normal/Off-Center
target: Normal/Off-Centre

en: Normalize Design Vector Function:
target: Normalise Design Vector Function:

en: Normalized Settings:
target: Normalised Settings:

en: Normalized position of this design along each axis
target: Normalised position of this design along each axis

en: Normally kerning is based on achieving a constant (optical)
    separation between glyphs, but occasionally it is desireable
    to have a kerning table where the kerning is based on the
    closest approach between two glyphs (So if the desired separ-
    ation is 0 then the glyphs will actually be touching.
target: Normally kerning is based on achieving a constant (optical)
    separation between glyphs, but occasionally it is desirable
    to have a kerning table where the kerning is based on the
    closest approach between two glyphs (So if the desired separ-
    ation is 0 then the glyphs will actually be touching.

en: Oblique/Off-Center
target: Oblique/Off-Centre

en: Old Outline Color
target: Old Outline Colour

en: Open AutoKern dialog for new kerning subtables
target: Open AutoKern dialogue for new kerning subtables

en: Optimized For ClearType
target: Optimised For ClearType

en: Original Color
target: Original Colour

en: PS Type 1 (Ascii)
target: PS Type 1 (ASCII)

en: Pfm Save Failed
target: PFM Save Failed

en: Physical screen width, measured in centimeters
    For this to take effect you must save the resource data (press the [Save] button)
    and restart fontforge
target: Physical screen width, measured in centimetres
    For this to take effect you must save the resource data (press the [Save] button)
    and restart fontforge

en: Pick a color
target: Pick a colour

en: Please select some glyphs in the font views at the bottom of the dialog for FontForge to put into classes.
target: Please select some glyphs in the font views at the bottom of the dialogue for FontForge to put into classes.

en: Point Color
target: Point Colour

en: Point of Inflection Color
target: Point of Inflection Colour

en: Prefs_App|FontForge recognizes BROWSER, MF and AUTOTRACE.
target: Prefs_App|FontForge recognises BROWSER, MF and AUTOTRACE.

en: Prefs_App|to alter that behavior you may set an environment
target: Prefs_App|to alter that behaviour you may set an environment

en: Prev CP Color
target: Prev CP Colour

en: Property|New...
target: New...

en: Randomize
target: Randomise

en: Raster Color
target: Raster Colour

en: Raster Dark Color
target: Raster Dark Colour

en: Raster Grid Color
target: Raster Grid Colour

en: Raster New Color
target: Raster New Colour

en: Raster Old Color
target: Raster Old Colour

en: Rasterize at sizes:
target: Rasterise at sizes:

en: Rasterizing...
target: Rasterising...

en: Read of Uninitialized Store
target: Read of Uninitialised Store

en: Retain current advance width, center glyph within that width
target: Retain current advance width, centre glyph within that width

en: Rotate 90° CCW
target: Rotate 90° ACW

en: Rotate _90° CCW
target: Rotate _90° ACW

en: Rule Color
target: Rule Colour

en: Ruler Big Tick Color
target: Ruler Big Tick Colour

en: Saturation and Value, and the three colors must be between 0 and 1
target: Saturation and Value, and the three colours must be between 0 and 1

en: Save Colors
target: Save Colours

en: Save glyph colors in the PfEd table
target: Save glyph colours in the PfEd table

en: Screen Width in Centimeters
target: Screen Width in Centimetres

en: Script|Arabic
target: Arabic

en: Script|Aramaic
target: Aramaic

en: Script|Armenian
target: Armenian

en: Script|Avestan
target: Avestan

en: Script|Batak
target: Batak

en: Script|Bengali
target: Bengali

en: Script|Buginese
target: Buginese

en: Script|Buhid
target: Buhid

en: Script|Cham
target: Cham

en: Script|Cherokee
target: Cherokee

en: Script|Ethiopic
target: Ethiopic

en: Script|Georgian
target: Georgian

en: Script|Greek
target: Greek

en: Script|Gujarati
target: Gujarati

en: Script|Hanunóo
target: Hanunóo

en: Script|Hebrew
target: Hebrew

en: Script|Javanese
target: Javanese

en: Script|Kannada
target: Kannada

en: Script|Khmer
target: Khmer

en: Script|Lao
target: Lao

en: Script|Latin
target: Latin

en: Script|Limbu
target: Limbu

en: Script|Malayālam
target: Malayālam

en: Script|Mandaean
target: Mandaean

en: Script|Mongolian
target: Mongolian

en: Script|Myanmar
target: Myanmar

en: Script|Old Permic
target: Old Permic

en: Script|Oriya
target: Oriya

en: Script|Pahlavi
target: Pahlavi

en: Script|Phoenician
target: Phoenician

en: Script|Sinhala
target: Sinhala

en: Script|Syriac
target: Syriac

en: Script|Tagalog
target: Tagalog

en: Script|Tagbanwa
target: Tagbanwa

en: Script|Tamil
target: Tamil

en: Script|Telugu
target: Telugu

en: Script|Thai
target: Thai

en: Script|Tibetan
target: Tibetan

en: Script|Ugaritic
target: Ugaritic

en: Script|Vai
target: Vai

en: Script|Yi
target: Yi

en: Select by Color
target: Select by Colour

en: Select by _Color
target: Select by _Colour

en: Selected BG Color
target: Selected BG Colour

en: Selected CP Color
target: Selected CP Colour

en: Selected FG Color
target: Selected FG Colour

en: Selected Point Color
target: Selected Point Colour

en: Selected Width Color
target: Selected Width Colour

en: Set _Color
target: Set _Colour

en: Side Bearing Color
target: Side Bearing Colour

en: Specifies file format used to pass the font to freetype
      pfb -- is the standard postscript type1
      ttf -- is truetype
      otf -- is opentype
      nohints -- freetype rasterizes without hints
      bitmap -- not passed to freetype for rendering
        bitmap fonts must already be generated
      FontForge -- uses FontForge's own rasterizer, not
        freetype's. Only as last resort
target: Specifies file format used to pass the font to freetype
      pfb -- is the standard postscript type1
      ttf -- is truetype
      otf -- is opentype
      nohints -- freetype rasterises without hints
      bitmap -- not passed to freetype for rendering
        bitmap fonts must already be generated
      FontForge -- uses FontForge's own rasteriser, not
        freetype's. Only as last resort

en: Specify the color (& opacity) at stop points
    along the line drawn above. The offset is a
    percentage of the distance from the start to
    the end of the line. The color is a 6 (hex)
    digit number expressing an RGB color.
target: Specify the colour (& opacity) at stop points
    along the line drawn above. The offset is a
    percentage of the distance from the start to
    the end of the line. The colour is a 6 (hex)
    digit number expressing an RGB colour.

en: Standard shift down applied to the
    denominator in display style.
    Postive values indicate downward motion.
target: Standard shift down applied to the
    denominator in display style.
    Positive values indicate downward motion.

en: Standard shift down applied to the denominator.
    Postive values indicate downward motion.
target: Standard shift down applied to the denominator.
    Positive values indicate downward motion.

en: Storage %d has not been initialized, yet the previous instruction read it
target: Storage %d has not been initialised, yet the previous instruction read it

en: Synchronize
target: Synchronise

en: Template Color
target: Template Colour

en: Text color for popup windows
target: Text colour for popup windows

en: Text color for progress windows
target: Text colour for progress windows

en: Text color of column headers at the top of a matrix edit
target: Text colour of column headers at the top of a matrix edit

en: The %1$s in the search dialog contains a reference to %2$.20hs which does not exist in the new font.
    Should I remove the reference?
target: The %1$s in the search dialogue contains a reference to %2$.20hs which does not exist in the new font.
    Should I remove the reference?

en: The 'gasp' table gives you control over when grid-fitting and
    anti-aliased rasterizing are done.
    The table consists of an (ordered) list of pixel sizes each with
    a set of flags. Those flags apply to all pixel sizes bigger than
    the previous table entry but less than or equal to the current.
    The list must be terminated with a pixel size of 65535.
    Version 1 of the table contains two additional flags that
    apply to MS's ClearType rasterizer.
    
    The 'gasp' table only applies to truetype fonts.
target: The 'gasp' table gives you control over when grid-fitting and
    anti-aliased rasterising are done.
    The table consists of an (ordered) list of pixel sizes each with
    a set of flags. Those flags apply to all pixel sizes bigger than
    the previous table entry but less than or equal to the current.
    The list must be terminated with a pixel size of 65535.
    Version 1 of the table contains two additional flags that
    apply to MS's ClearType rasteriser.
    
    The 'gasp' table only applies to truetype fonts.

en: The color of a selected point
target: The colour of a selected point

en: The color of an on-curve point
target: The colour of an on-curve point

en: The color of anchor stars
target: The colour of anchor stars

en: The color of another glyph drawn in the current view to show where it would be placed by an anchor lookup
target: The colour of another glyph drawn in the current view to show where it would be placed by an anchor lookup

en: The color of grid-fit (and other) raster blocks
target: The colour of grid-fit (and other) raster blocks

en: The color of grid-fit outlines
target: The colour of grid-fit outlines

en: The color of outlines in inactive layers
target: The colour of outlines in inactive layers

en: The color of outlines in the active layer
target: The colour of outlines in the active layer

en: The color of raster blocks which have just been turned off (in the debugger when an instruction moves a point)
target: The colour of raster blocks which have just been turned off (in the debugger when an instruction moves a point)

en: The color of raster blocks which have just been turned on (in the debugger when an instruction moves a point)
target: The colour of raster blocks which have just been turned on (in the debugger when an instruction moves a point)

en: The color of the clip path
target: The colour of the clip path

en: The color of the line marking the advance width
target: The colour of the line marking the advance width

en: The color of the line marking the advance width when it is selected
target: The colour of the line marking the advance width when it is selected

en: The color of the line marking the grid-fit advance width
target: The colour of the line marking the grid-fit advance width

en: The color of the line(s) marking ligature carets
target: The colour of the line(s) marking ligature carets

en: The color of the point which is the start of a contour
target: The colour of the point which is the start of a contour

en: The color used to draw a hint which conflicts with another
target: The colour used to draw a hint which conflicts with another

en: The color used to draw a selected control point of an on-curve point
target: The colour used to draw a selected control point of an on-curve point

en: The color used to draw bitmap (single bit) images which do not specify a clut
target: The colour used to draw bitmap (single bit) images which do not specify a clut

en: The color used to draw diagonal hints
target: The colour used to draw diagonal hints

en: The color used to draw horizontal hints
target: The colour used to draw horizontal hints

en: The color used to draw markers for splines which are almost, but not quite horizontal or vertical at their end-points
target: The colour used to draw markers for splines which are almost, but not quite horizontal or vertical at their end-points

en: The color used to draw points at extrema (if that mode is active)
target: The colour used to draw points at extrema (if that mode is active)

en: The color used to draw points of inflection (if that mode is active)
target: The colour used to draw points of inflection (if that mode is active)

en: The color used to draw the "next" control point of an on-curve point
target: The colour used to draw the "next" control point of an on-curve point

en: The color used to draw the "previous" control point of an on-curve point
target: The colour used to draw the "previous" control point of an on-curve point

en: The color used to draw the active horizontal hint which the Review Hints dialog is examining
target: The colour used to draw the active horizontal hint which the Review Hints dialogue is examining

en: The color used to draw the active vertical hint which the Review Hints dialog is examining
target: The colour used to draw the active vertical hint which the Review Hints dialogue is examining

en: The color used to draw the large tick marks in rulers.
target: The colour used to draw the large tick marks in rulers.

en: The color used to draw vertical hints
target: The colour used to draw vertical hints

en: The color used to fill the outline if that mode is active
target: The colour used to fill the outline if that mode is active

en: The color used to mark blue zones in the blue values entry of the private dictionary
target: The colour used to mark blue zones in the blue values entry of the private dictionary

en: The color used to mark blue zones in the family blues entry of the private dictionary
target: The colour used to mark blue zones in the family blues entry of the private dictionary

en: The convention is that PostScript fonts should have an Em-Size of 1000. But this font has a size of %d. This is not an error, but you might consider altering the Em-Size with the Element->Font Info->General dialog.
    Do you wish to continue to generate your font in spite of this?
target: The convention is that PostScript fonts should have an Em-Size of 1000. But this font has a size of %d. This is not an error, but you might consider altering the Em-Size with the Element->Font Info->General dialogue.
    Do you wish to continue to generate your font in spite of this?

en: The convention is that TrueType fonts should have an Em-Size which is a power of 2. But this font has a size of %d. This is not an error, but you might consider altering the Em-Size with the Element->Font Info->General dialog.
    Do you wish to continue to generate your font in spite of this?
target: The convention is that TrueType fonts should have an Em-Size which is a power of 2. But this font has a size of %d. This is not an error, but you might consider altering the Em-Size with the Element->Font Info->General dialogue.
    Do you wish to continue to generate your font in spite of this?

en: The fontname begins with the utf8 byte order sequence. This is illegal. %s
target: The fontname begins with the UTF8 byte order sequence. This is illegal. %s

en: The glyph is rasterized at the size above, but it
    may be difficult to see the alignment errors
    that can happen at small pixelsizes. This allows
    you to expand each pixel to show potential problems
    better.
target: The glyph is rasterised at the size above, but it
    may be difficult to see the alignment errors
    that can happen at small pixelsizes. This allows
    you to expand each pixel to show potential problems
    better.

en: The gradient will be a linear gradient,
    With the color change happening along
    the line drawn in the view
target: The gradient will be a linear gradient,
    With the colour change happening along
    the line drawn in the view

en: The gradient will be a radial gradient,
    With the color change happening in circles
    starting at the focus (if specified) and
    extending outward until it reaches the
    specified radius.
target: The gradient will be a radial gradient,
    With the colour change happening in circles
    starting at the focus (if specified) and
    extending outward until it reaches the
    specified radius.

en: The mark showing a checkbox is off (up, not selected)
target: The mark showing a tickbox is off (up, not selected)

en: The mark showing a checkbox is on (depressed, selected)
target: The mark showing a tickbox is on (depressed, selected)

en: The maximum number of Undoes/Redoes stored in a glyph
target: The maximum number of Undos/Redos stored in a glyph

en: The maximum slope difference which still allows to consider two points "parallel".
    Enlarge this to make the autohinter more tolerable to small deviations from straight lines when detecting stem edges.
target: The maximum slope difference which still allows to consider two points "parallel".
    Enlarge this to make the auto-hinter more tolerable to small deviations from straight lines when detecting stem edges.

en: The number of entries in the design settings must match the number in normalized settings
target: The number of entries in the design settings must match the number in normalised settings

en: The size at which the current glyph is rasterized.
    For small pixelsize you may want to use the magnification
    factor below to get a clearer view.
target: The size at which the current glyph is rasterised.
    For small pixelsize you may want to use the magnification
    factor below to get a clearer view.

en: The size at which the current glyph is rasterized.
    For small pixelsize you may want to use the magnification
    factor below to get a clearer view.
    
    The pulldown list contains the pixelsizes at which there
    are device table corrections.
target: The size at which the current glyph is rasterised.
    For small pixelsize you may want to use the magnification
    factor below to get a clearer view.
    
    The pulldown list contains the pixelsizes at which there
    are device table corrections.

en: The tiles should be centered on the path
target: The tiles should be centred on the path

en: The typo ascent&descent fields are>supposed<
    to specify the line spacing on windows.
    In fact usually the win ascent/descent fields do.
    (The descent field is usually negative.)
    If the "[] Is Offset" checkbox is clear then
    any number you enter will be the value used in OS/2.
    If set then any number you enter will be added to the
    Em-size. You should leave this
    field 0 and check "[*] Is Offset" in most cases.
    
    NOTE: Typo Descent is a NEGATIVE number for
    things below the baseline
target: The typo ascent&descent fields are>supposed<
    to specify the line spacing on windows.
    In fact usually the win ascent/descent fields do.
    (The descent field is usually negative.)
    If the "[] Is Offset" tickbox is clear then
    any number you enter will be the value used in OS/2.
    If set then any number you enter will be added to the
    Em-size. You should leave this
    field 0 and check "[*] Is Offset" in most cases.
    
    NOTE: Typo Descent is a NEGATIVE number for
    things below the baseline

en: There already exists a 'cvt' table, perhaps legacy. FontForge can use it, but can't make any assumptions on values stored there, so generated instructions will be of lower quality. If legacy hinting is to be scrapped, it is suggested to clear the `cvt` and repeat autoinstructing.
target: There already exists a 'cvt' table, perhaps legacy. FontForge can use it, but can't make any assumptions on values stored there, so generated instructions will be of lower quality. If legacy hinting is to be scrapped, it is suggested to clear the `cvt` and repeat auto-instructing.

en: There exists a 'fpgm' code that seems incompatible with FontForge's. Instructions generated will be of lower quality. If legacy hinting is to be scrapped, it is suggested to clear the `fpgm` and repeat autoinstructing. It will be then possible to append user's code to FontForge's 'fpgm', but due to possible future updates, it is extremely advised to use high numbers for user's functions.
target: There exists a 'fpgm' code that seems incompatible with FontForge's. Instructions generated will be of lower quality. If legacy hinting is to be scrapped, it is suggested to clear the `fpgm` and repeat auto-instructing. It will be then possible to append user's code to FontForge's 'fpgm', but due to possible future updates, it is extremely advised to use high numbers for user's functions.

en: This dialog has two formats. A simpler one which
     hides some of the complexities of these rules,
     or a more complex form which gives you full control.
target: This dialogue has two formats. A simpler one which
     hides some of the complexities of these rules,
     or a more complex form which gives you full control.

en: This font is marked with an FSType of 2 (Restricted
    License). That means it is not editable without the
    permission of the legal owner.
    
    Do you have such permission?
target: This font is marked with an FSType of 2 (Restricted
    Licence). That means it is not editable without the
    permission of the legal owner.
    
    Do you have such permission?

en: This glyph has no instructions. Adding instructions (a DELTA) may change its rasterization significantly.
target: This glyph has no instructions. Adding instructions (a DELTA) may change its rasterisation significantly.

en: This index is much larger than the closest neighbor
target: This index is much larger than the closest neighbour

en: This is the approximate location of the vanishing point.
    It does not include the offset induced by "Center of selection"
    nor "Last Press".
target: This is the approximate location of the vanishing point.
    It does not include the offset induced by "Centre of selection"
    nor "Last Press".

en: This is the number of pixels by which the anchor
    should be moved horizontally when the glyph is
    rasterized at the above size.  This information
    is part of the device table for this anchor.
    Device tables are particularly important at small
    pixelsizes where rounding errors will have a
    proportionally greater effect.
target: This is the number of pixels by which the anchor
    should be moved horizontally when the glyph is
    rasterised at the above size.  This information
    is part of the device table for this anchor.
    Device tables are particularly important at small
    pixelsizes where rounding errors will have a
    proportionally greater effect.

en: This is the number of pixels by which the anchor
    should be moved vertically when the glyph is
    rasterized at the above size.  This information
    is part of the device table for this anchor.
    Device tables are particularly important at small
    pixelsizes where rounding errors will have a
    proportionally greater effect.
target: This is the number of pixels by which the anchor
    should be moved vertically when the glyph is
    rasterised at the above size.  This information
    is part of the device table for this anchor.
    Device tables are particularly important at small
    pixelsizes where rounding errors will have a
    proportionally greater effect.

en: This path should have been drawn in a counter-clockwise direction
target: This path should have been drawn in an anti-clockwise direction

en: This pdf file has no fonts
target: This PDF file has no fonts

en: This specifies the line spacing on the mac.
    (The descent field is usually negative.)
    If the "[] Is Offset" checkbox is clear then
    any number you enter will be the value used in hhea.
    If set then any number you enter will be added to the
    font's bounds. You should leave this
    field 0 and check "[*] Is Offset" in most cases.
    
    NOTE: hhea Descent is a NEGATIVE value for things
    below the baseline
target: This specifies the line spacing on the mac.
    (The descent field is usually negative.)
    If the "[] Is Offset" tickbox is clear then
    any number you enter will be the value used in hhea.
    If set then any number you enter will be added to the
    font's bounds. You should leave this
    field 0 and check "[*] Is Offset" in most cases.
    
    NOTE: hhea Descent is a NEGATIVE value for things
    below the baseline

en: Title Divider Color
target: Title Divider Colour

en: Title Text Color
target: Title Text Colour

en: Trace Color
target: Trace Colour

en: Unable to parse the pdf objects that make up %s
target: Unable to parse the PDF objects that make up %s

en: Unlikely count of ligature components (%d), I suspect this ligature sub-
     table is garbage, I'm giving up on it.
target: Unlikely count of ligature components (%d), I suspect this ligature sub-
     table is rubbish, I'm giving up on it.

en: Use the FreeType rasterizer (when available)
    to rasterize glyphs in the font view.
    This generally results in better quality.
target: Use the FreeType rasteriser (when available)
    to rasterise glyphs in the font view.
    This generally results in better quality.

en: VFlex Hint Color
target: VFlex Hint colour

en: VHint Active Color
target: VHint Active Colour

en: Vert. Hint Color
target: Vert. Hint Colour

en: Warning: This version of FontForge does not contain extended type3/svg support
     needed for this font.
    Reconfigure with --with-type3.
target: Warning: This version of FontForge does not contain extended type3/SVG support
     needed for this font.
    Reconfigure with --with-type3.

en: When a curve passes very close to the center of a
    pixel you might want to check that the curve is on
    the intended side of that pixel.
    If it's on the wrong side, consider using a DELTA
    instruction to adjust the closest point at the
    current pixelsize.
target: When a curve passes very close to the centre of a
    pixel you might want to check that the curve is on
    the intended side of that pixel.
    If it's on the wrong side, consider using a DELTA
    instruction to adjust the closest point at the
    current pixelsize.

en: When centering an accent over a glyph, should the accent
    be centered on the highest point(s) of the glyph,
    or the middle of the glyph?
target: When centring an accent over a glyph, should the accent
    be centred on the highest point(s) of the glyph,
    or the middle of the glyph?

en: When debugging in grey-scale this is the color of a raster block which is fully covered.
target: When debugging in grey-scale this is the colour of a raster block which is fully covered.

en: When displaying a list of glyph names
    (or sometimes just a single glyph name)
    FontForge will add the unicode character
    the name refers to in parenthesis after
    the name. It does this because some names
    are obscure.
    Some people would prefer not to see this,
    so this preference item lets you turn off
     this behavior
target: When displaying a list of glyph names
    (or sometimes just a single glyph name)
    FontForge will add the unicode character
    the name refers to in parenthesis after
    the name. It does this because some names
    are obscure.
    Some people would prefer not to see this,
    so this preference item lets you turn off
     this behaviour

en: When generating a Mac Type1 resource font, you MUST generate at least one NFNT bitmap font to go with it. If you have not created any bitmaps for this font, cancel this dlg and use the Element->Bitmaps Available command to create one
target: When generating a Mac Type1 resource font, you MUST generate at least one NFNT bitmap font to go with it. If you have not created any bitmaps for this font, cancel this dialogue and use the Element->Bitmaps Available command to create one

en: When placing grave and acute accents above letters, should
    FontForge center them based on their full width, or
    should it just center based on the lowest point
    of the accent.
target: When placing grave and acute accents above letters, should
    FontForge centre them based on their full width, or
    should it just centre based on the lowest point
    of the accent.

en: Width Color
target: Width Colour

en: You are attempting to save a CID font in a non-CID format. This is ok, but it means that only the current sub-font will be saved.
    Is that what you want?
target: You are attempting to save a CID font in a non-CID format. This is OK, but it means that only the current sub-font will be saved.
    Is that what you want?

en: You are deleting the last anchor point in this character.
    Doing so will cause this dialog to close, is that what you want?
target: You are deleting the last anchor point in this character.
    Doing so will cause this dialogue to close, is that what you want?

en: You may create a script menu containing up to 10 frequently used scripts
    Each entry in the menu needs both a name to display in the menu and
    a script file to execute. The menu name may contain any unicode characters.
    The button labeled "..." will allow you to browse for a script file.
target: You may create a script menu containing up to 10 frequently used scripts
    Each entry in the menu needs both a name to display in the menu and
    a script file to execute. The menu name may contain any unicode characters.
    The button labelled "..." will allow you to browse for a script file.

en: You may create a script menu containing up to 10 frequently used scripts.
    Each entry in the menu needs both a name to display in the menu and
    a script file to execute. The menu name may contain any unicode characters.
    The button labeled "..." will allow you to browse for a script file.
target: You may create a script menu containing up to 10 frequently used scripts.
    Each entry in the menu needs both a name to display in the menu and
    a script file to execute. The menu name may contain any unicode characters.
    The button labelled "..." will allow you to browse for a script file.

en: _Center in Width
target: _Centre in Width

en: _License...
target: _Licence...

en: cursive|Script
target: Script

en: png
target: PNG

en: writing system|Script
target: Script
